双辊薄带连铸制备Ti-43Al合金板材及其在热处理过程中的显微组织表征(英文)

双辊薄带连铸制备Ti-43Al合金板材及其在热处理过程中的显微组织表征(英文)

论文摘要

薄带连铸技术直接成形的特点可以实现难变形金属板材的制备并显著缩短流程。通过双辊薄带连铸技术制备尺寸为1000 mm×110 mm×2 mm的Ti-43Al合金板材,并对铸轧板材及热处理过程显微组织进行系统分析。由于凝固过程中冷却速率变化以及对称性生长,沿铸轧板材厚度方向出现边部柱状晶、心部等轴晶的不均匀组织,且中心区存在严重的Al元素偏析;铸轧过程中较快的冷却速度显著细化板材组织,晶粒间距为20-30μm,α2/γ片层间距达到10-20 nm。此外,铸轧板材经过热处理后获得近γ组织、近片层组织和全片层组织,组织均匀性得到明显改善。

论文目录

  • 1 Introduction
  • 2 Experimental
  • 3 Results and discussion
  •   3.1 Macro-and microstructures of strip-casting Ti-43Al sheet
  •   3.2 Microstructure characteristic and hardness of strip-casting Ti-43Al alloy
  •   3.3 Microstructure evolution of strip-casting Ti-43Al alloy during heat treatment process
  • 4 Conclusions
  • 文章来源

    类型: 期刊论文

    作者: 徐莽,刘国怀,李天瑞,王丙兴,王昭东

    关键词: 薄带铸轧,钛铝合金,板材制备,显微组织表征,热处理

    来源: Transactions of Nonferrous Metals Society of China 2019年05期

    年度: 2019

    分类: 工程科技Ⅰ辑

    专业: 金属学及金属工艺

    单位: 东北大学轧制技术及连轧自动化国家重点实验室

    基金: Project(51504060) supported by the National Natural Science Foundation of China,Projects(2016YFB0301201,2016YFB0300603) supported by the National Key Research and Development Program of China,Project(N160713001) supported by the Fundamental Research Funds for the Central Universities,China

    分类号: TG335.9;TG156

    页码: 1017-1025

    总页数: 9

    文件大小: 2915K

    下载量: 87

    相关论文文献

    标签:;  ;  ;  ;  ;  

    双辊薄带连铸制备Ti-43Al合金板材及其在热处理过程中的显微组织表征(英文)
    下载Doc文档

    猜你喜欢